Product list產品列表
- HC012-JB-6C型 微機控制高精度臺式表面粗糙度測量?jī)x
- HC010系列 硬度計鋼球壓頭 硬度計壓頭 鋼球壓頭
- HC010系列 肖氏硬度塊 肖氏硬度計 肖氏硬度 硬度
- HC010系列 韋氏硬度塊系列 韋氏硬度 韋氏硬度計
- HC010系列 超聲波硬度塊系列 硬度計 超聲波硬度
- HC010系列 金剛石克努普壓頭 金剛石壓頭 克努普壓頭
- HC010系列 努普氏硬度塊系列 努普硬度 努氏硬度計
- HC010系列 巴氏硬度塊系列 巴氏硬度 硬度計
- HC010系列 硬度計鋼球壓頭 硬度計壓頭 鋼球壓頭
- HC010系列 金剛石維氏壓頭 金剛石壓頭 維氏壓頭
- HC010 里氏硬度塊系列 硬度塊 硬度 里氏硬度
- HC010 布氏硬度塊系列 布氏硬度 硬度塊 硬度計
- HC010 維氏硬度塊系列 維氏硬度 硬度 硬度計
- HC010系列 洛氏硬度塊 硬度計 硬度塊 硬度 洛氏硬度
- HBRV-187.5型 電動布洛維硬度計 硬度計 萬能硬度計
- HRS-150型 數顯洛氏硬度計【大屏幕液晶數字顯示】
- HBRVS-187.5 數顯布洛維硬度計【大屏幕液晶數字顯示】
- HRSS-150型 數顯洛氏表面洛氏硬度計(全洛氏) 硬度計
- DHB-3000A型 全電子布氏硬度計【小屏顯】 布氏硬度計
- HBST-3000A型 電腦全功能布氏硬度計【大屏幕液晶】
- 【熱銷】XHB-3000型 數顯布氏硬度計【大屏幕顯示】
- HR-150A型 手動洛氏硬度計 洛氏硬度 硬度計
- 更多企業推薦產品
Customer service在線客服
推薦產品
HRS-150型 數顯洛氏硬度計【大屏幕液晶數字顯示】 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HRS-150型數顯洛氏硬度計【大屏幕液晶數字顯示】 HRS-150 Digital Display Rockwell Hardness Tester [large LCD digital display]
產品簡介/ Product introduction: HRS-150數顯洛氏硬度計是機電一體化的硬度測試儀器.數顯洛氏硬度計外觀新穎,大屏幕顯示,菜單式結構,采用微機控制,硬度值以數字直接顯示.硬度測試結果可以直接打印輸出,升降螺桿與旋輪間自動反饋鎖合,外接RS232超級終端設置,可外接打印機,具有良好的可靠性,可操作性和直觀性;除試臺升降外,完全實現了自動化,消除了操作和讀數誤差。 各項技術指標均符合:GB/T230-2002洛氏硬度計技術條件,參照ISO6508-2:1999國際標準。 HRS-150 Digital Rockwell hardness tester is mechatronics hardness testing equipment. Digital Rockwell hardness tester appearance of new, large-screen display, menu structure, using computer control, digital display hardness values ????directly. Hardness test the results can be directly printed output, screw and rotary movements between automatic feedback wheel lock, external RS232 HyperTerminal settings, external printer, with good reliability, operability and intuitive; addition to test lift, the fully automated eliminates operator error and reading. Digital Rockwell hardness tester also has the Rockwell scale selection / Plastics Rockwell scale choice (optional feature) / hardness hardness conversion between various functions. Digital Rockwell hardness tester for ferrous metals, non-ferrous metals and non-metallic materials hardness measurement. The technical indicators are in line with: GB/T230-2002 Rockwell hardness technical conditions, referring to ISO6508-2: 1999 international standard.
適用范圍/ Scope of application: 洛氏硬度計適用于黑色金屬、有色金屬和非金屬材料的硬度測定。 適用范圍:淬火、表面淬火鋼,調質、退火鋼,冷硬鑄件,可鍛鑄件,硬質合金鋼,鋁合金,軸承鋼,硬化薄鋼板等。 Rockwell hardness meter is suitable for measuring the hardness of ferrous metal, nonferrous metal and nonmetal materials. Scope of application: Hardened and surface hardened steel, quenching and tempering, annealing of steel, chilled casting, malleable cast iron, hard alloy steel, aluminum alloy, bearing steel, hardened steel sheet etc..
工作環境/ Work environment: 1、在室溫10~35℃的范圍內; 2、在穩固的基礎上水平安裝; 3、在無震動的環境中; 4、周?chē)鸁o(wú)腐蝕性介質; 5、室內相對濕度不大于65%; 1, in the range of room temperature 10~35℃; 2, in a stable foundation for horizontal installation; 3, in the absence of vibration environment; 4,Non corrosive medium, around; 5, the indoor relative humidity of not more than 65%;
工作原理/ Working principle: 洛氏硬度的試驗原理:用金剛石圓錐體壓頭或一定直徑的鋼球壓頭,在初試驗力F0和主試驗力F1先后作用下,壓入試樣表面,保持一定時間,卸除主試驗力,保留初試驗力,此時的壓入深度為h1,在初試驗力作用下的壓入深度為h0,它們之差e(h1—h0)來表示壓痕深度的永久增量。每壓入0.002mm為一個洛氏硬度單位。(圖1) 洛氏硬度的計算公式:HRA、C=100—(e/0.002) HRB=130—(e/0.002) The test principle of Rockwell hardness: Ball indenter or certain diameter diamond cone pressure head, in the initial test force F0 and the main test force under the action of F1 successively, pressed into the surface of the sample, keep a certain time, removable main test force, retain the initial test force, indentation depth of the H1, in the initial check depth of press force is H0, and the difference between them (e H1 H0) to represent the permanent incremental indentation depth. Each press 0.002mm as a Rockwell hardness unit. (Figure 1) The calculation formula of Rockwell hardness: HRA, C=100 (e/0.002) HRB=130 (e/0.002)
技術指標/Technical Index: 1.洛氏標尺:HRA、HRB、HRC、HRD、HRE、HRF、HRG、HRH、HRK 2.初試驗力(N):98.07N(10kg) 3.總試驗力(N):588(60kg),980N(100kg),1471N(150kg) 4.轉換標尺:表面洛氏、布氏、維氏 5.硬度讀取:大屏幕數字顯示 6.數據輸出:內置打印機和RS232接口 7.總試驗力保持時間(S):0-60 8.試件允許最大高度:170mm 9.電源電壓:AC220V±5%,50~60Hz 10.壓頭中心到機身距離:165mm 11.數顯洛氏硬度計外形尺寸(mm):520×240×720 12.數顯洛氏硬度計重量(kg):約80 13.執行標準:GB/T230.2國家標準;JJG112檢定規程 14.硬度值范圍: HRA:20~88 HRB:20~100 HRC:20~70 1 Rockwell scale:. HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK 2 Preliminary test force (N):. 98.07N (10kg) 3 Total test force (N): 588 (60kg), 980N (100kg), 1471N (150kg) 4 conversion scale: Superficial Rockwell, Brinell, Vickers 5 Hardness read: large-screen digital display 6 Data output: built-in printer and RS232 interface 7 Total test force dwell time (S) :0-60 8 test Maximum height: 170mm 9 Power supply voltage:. AC220V ± 5%, 50 ~ 60Hz 10 indenter center to the fuselage: 165mm 11 Digital Rockwell Hardness Dimensions (mm): 520 × 240 × 720 12 Digital Rockwell hardness tester Weight (kg): about 80 13 Standard: GB/T230.2 national standards; JJG112 test procedures 14 hardness range: 儀器精度指標/ Instrument accuracy specifications: 1、硬度計示值允許誤差(表1)
2、洛氏硬度試驗標尺、壓頭、試驗力及應用范圍(表2)
注:洛氏硬度測試常用標尺為A、B、C三種
標準配置/ Standard configuration:
客戶名錄: 詳見公司客戶名錄 、、、、、、
質量保證: 本公司保證交付的硬度計執行標準:金屬洛氏硬度實驗GB/T230-2002國家標準、JJG112-2003金屬洛氏硬度計檢定規程、JJG 152-1991金屬表面洛氏硬度計檢定規程,參照ISO6508-2:1999國際標準。精度達到合同要求。生產研發過程嚴格執行ISO9001:2000質量管理體系. We guarantee delivery of performance standards hardness: Rockwell hardness test GB/T230-2002 metal national standards, JJG112-2003 Metal Rockwell hardness test procedures, JJG 152-1991 metal surface Rockwell hardness test procedures, referring to ISO6508-2:1999 international standards. Accuracy requirements of the contract. Production and development process strictly implement ISO9001: 2000 quality management system. |